- Quality branded Erich Jäger plug for trailers
- 7+6 pins (standard NEN 6120)
- The 7+6 pin design, which was formerly found on some caravans, for example. The plug allows all the functions of a 13-pin connection to be used and can be connected to a 7+6 pin socket or to a standard 7-pin socket (type 12N according to ISO 1724) without the use of a reducer. When plugged into a standard 7-pin socket, only the basic six functions (L+P marker lights, brake lights, L+P turn signals, fog lights) will work on the trailer. ATTENTION! Cannot be used in 13-pole sockets according to ISO 11446.
- High-quality branded plugs differ from so-called noname products mainly by higher precision of plastic mouldings and processing of other components. This makes them easier to assemble and use, as there is no need to exert excessive force or wobble during insertion.
- Easy connection of wires under the screws without special tools. When wiring, it is recommended that the conductor be strengthened by threading a cable termination sleeve (not included).
- Cable gland with screw fitting and grommet for cable diameter 9.2 to 11.5 mm
- The plug is designed for 12V installations.
- You can find the wiring of forks and sockets in our advice section: /wiring-forks-and-sockets-prives-and-sockets
| Category: | Zástrčky přívěsům 7 PIN |
|---|---|
| Weight: | 1 kg |
| materiál: | plast |
| napětí: | 12V |
| norma: | NEN 6120 |
| počet pinů: | 13 |
| grommet: | hole for 1 cable |
| připojení kontaktů: | na šroubky |
Be the first who will post an article to this item!
Add a comment