Trailer plug, 12V, 7 PIN, two pins

High-quality Erich Jäger branded seven-pole plug for trailers with flat connectors

• Standard design (type 12N according to ISO 1724)
• Easy wire connection using standard 6.3 mm flat autoconnectors (faston connectors).
• Instead of the usual holes with small screws, there are "tabs" for 6.3 mm flat auto connectors on the inside for connecting the wires (connectors not included). The cable leading from the trailer with flat connectors can be easily connected to the plug without tools.
• Suitable, for example, as a replacement for the original plug in factory-made wiring harnesses equipped with flat car connectors for connection to a plug - e.g. some wiring harnesses Lucidity.
• Cable outlet with screw fitting and two grommets attached: one for one cable with a diameter of approx. 9.2 to 11.5 mm and the other for two cables with diameters of approx. 6 to 8 mm.
• High-quality branded plugs differ from so-called noname products mainly by higher precision of plastic mouldings and processing of other components. This makes them easier to assemble and use, as there is no need to exert excessive force or wobble during insertion.
• The plug is designed for 12V installations. Even though this socket is also used extensively in the Czech Republic for 24V, this is not recommended in order to avoid the possibility of connecting a trailer behind a car with an unsuitable voltage.
• You can find the wiring of forks and sockets in our advice section.