Interior lighting WAS LW10/728 PIR sensor, 12V (12 diodes)
- LED interior lighting with motion sensor in slim design with low height
- The light is equipped with 12 pcs of high luminous LEDs in smd design and motion sensor
- The integrated motion sensor allows automatic switching on and off of the lamp in the cargo area without the need for manual switching on and off
- Sensor range is approx. 3.5 m in all directions, sensing angle approx. 160°
- Approximately 60 seconds after the last motion is detected, the built-in timer turns off the light and the light will only turn on when the next motion is detected. If motion is detected in the sensor range at shorter intervals than 60 seconds, the light is on all the time without interruption.
- Light color bright white
- Clear flexible diode cover with high resistance to breakage
- Two holes with a diameter of 4.5 mm and a central spacing of 213.4 mm are provided at the ends for mounting the lamp. Cables with a length of approx. 37 cm are led out of the flashlight.
- Practical rubber pad included for easier mounting on uneven surfaces
- Height of flashlight only 10.4 mm + 2 mm sensor protrusion, with rubber pad 12.8 mm + 2 mm sensor protrusion
- Operating voltage 12 V DC, polarity does not matter, power consumption only 3.2 W (24 V available on request)
| Category: | Interior trailer lighting |
|---|---|
| Weight: | 1 kg |
| délka kabelu (m): | 0.37 |
| hloubka (mm): | 20.6 |
| materiál: | plast |
| provedení lampy: | LED |
| provozní napětí: | 12V |
| rozteč montážních šroubů/otvorů (mm): | 213.4 |
| šířka (mm): | 238 |
| typ vstupu (připojení): | cable |
| výška (mm): | 10.4 |
| consumption (at 12V) (W): | 3 |
| lamp switch: | No |
Be the first who will post an article to this item!
Add a comment