Zinc spray, Würth, 400 ml
For additional treatment of damaged hot-dip galvanized workpieces, permanently protects ferrous metals from corrosion.
For additional treatment of damaged hot-dip galvanized workpieces, permanently protects ferrous metals from corrosion.
Features: corrosion- and weather-resistant zinc coating with a bright, metallic gloss colour tone, surface colour tone similar to hot-dip galvanizing. Very suitable for spot welding. It can be repainted with lacquers (alkyd resin). When repainting with acrylic lacquers, an insulating primer must be applied. Quick drying. excellent adhesion on all metals.
Use: Shake the container vigorously for about 3 minutes before each use. The substrate must be cleaned, dry and free of any grease and rust. Apply the first coat in a thin layer for better adhesion. Optimum processing temperature: 20°C.
Note: Store in a dry place at room temperature (15-25 °C)
Features: corrosion- and weather-resistant zinc coating with a bright, metallic gloss colour tone, surface colour tone similar to hot-dip galvanizing. Very suitable for spot welding. It can be repainted with lacquers (alkyd resin). When repainting with acrylic lacquers, an insulating primer must be applied. Quick drying. excellent adhesion on all metals. Use: Shake the container vigorously for about 3 minutes before each use. The substrate must be cleaned, dry and free of any grease and rust. Apply the first coat in a thin layer for better adhesion. Optimum processing temperature: 20°C.
Technical features:
| package contents | 400ml |
| chemical base | modified alkyd resin |
| color | silver |
| minimum curing time | 10 hours |
| conditions for complete solidification/curing | 20°C |
| maximum curing time | 12 hours |
| resistance in the salt spray test | 240 hours |
| maximum temperature resistance | 240°C |
| dust drying time | 12 minutes |
| thickness of the dry layer (first coat crosswise) | 20 µm |
| zinc content in dry foil | 44 % |
| zinc content in varnish | 21 % |
| zinc content in the pigment | 99,9 % |
| coating thickness | 30 µm |
| substrates with good adhesion | ferrous metals wood jacket cardboard zinc sheets |
| suitable for spot welding | Yes |
| cross-section test | MAN 0-1 |
| Category: | Trailer maintenance |
|---|---|
| Weight: | 1.83 kg |
Be the first who will post an article to this item!