Trailer stabilizer AL-KO AKS 3504, drilling 14.5 mm

• Enables safer driving at higher speeds, reduces trailer sway and vibration when driving
• Stabilization of unwanted trailer swings is ensured by the ball stud being retracted by four friction segments. Two are placed in the axis of the direction of travel, and two in the axis perpendicular to the direction of travel
• Stabilizing couplings are to be used dry! (without the use of lubricants)
• IMPORTANT! When using the stabilizer on a lubricated towing bracket, the friction segments will be degraded
• The AL-KO AKS 3504 stabilizer joint is equipped with a correct connection indicator and a wear indicator for the ball joint and friction segments.
• After connecting the stabilizer to the towing device and pressing the control lever, the friction segments are pressed against the ball stud
• The integrated lock allows you to lock the stabilizer attached to the ball, even while driving. The trailer can be locked even when disconnected, using the AL-KO Safety Ball (included)
• The package also includes fasteners
• Can be mounted on 60 mm diameter ramp brake pull tubes.
• The friction segments can be replaced and their wear can be monitored from the outside without disassembly.
• Note: The use of stabilizing couplings is not suitable on balls attached to the hitch bracket with a single vertical bolt. The moment the friction segments grip the ball tightly and there is a slight sideways rotation during travel, the vertical bolt could be released from the bracket.
• Stabilizer weight approx. 5.2 kg

Package contents:

• Stabilizer AL-KO AKS 3504
• 2 keys
• fasteners
• insert AL-KO Safety ball