Stabilizer Winterhoff WS 3500 D60, bore H16/16 mm
Přidat k porovnání
The Winterhoff WS 3500 stabiliser is a stabiliser coupling for trailers with a maximum technically permissible weight of up to 3500 kg. Option for fixing with two horizontal M16 screws.
- Allows for safer driving at higher speeds, reduces trailer oscillation and vibration while driving.
- For use on trailers weighing at least 200 kg.
- Stabilization of unwanted trailer swings is ensured by the ball stud being retracted by two friction segments located in the axis of the direction of travel.
- Stabilizing couplings are used exclusively dry (without the use of lubricants). ATTENTION!!! When using a stabilizing clutch on a lubricated ball stud, the friction segments will be degraded and the stabilizing effect will be significantly reduced.
- The Winterhoff WS 3500 stabiliser joint is equipped with a correct connection indicator and a wear indicator for the ball coupling and friction segments.
- The stabilising coupling joint is supplied complete with fasteners and spacers for use on various drawtube diameters.
- Can be mounted on 60 mm diameter ramp brake pull tubes.
- The friction segments are replaceable and their wear rate can be monitored externally without the need for disassembly.
- The Winterhoff ROBSTOP lock can be purchased as an optional accessory, see related products below.
- Note: The use of stabilizing couplings is not suitable on balls attached to the hitch bracket with a single vertical bolt. The moment the friction segments grip the ball tightly and there is a slight sideways rotation during travel, the vertical bolt could be released from the bracket.
- Weight: 6.2 kg
Package contents:
- 1x stabilizer Winterhoff WS 3000
- 2x M14 hexagon head bolt
- 2x self-locking nuts M14
- 2x saddle pad
- 1x pin for securing the shock absorber. brakes against ejection
- 1x Winterhoff Safety Ball
- 1x Winterhoff ball cap
Category: | Trailer stabilizers |
---|---|
Weight: | 1 kg |
materiál: | litina |
pro přívěsy: | brzděné |
maximální hmotnost přívěsu (kg): | 3500 |
montáž na trubku průměru: | 65mm |
hodnota D/Dc: | 31 |
maximální povolené svislé zatížení (kg): | 200 |
otvory pro uchycení: | 2x horizontálně |
pro kouli o průměru (mm): | 50 |
pro profil: | trubka |
velikost horizontálních šroubů: | M16 |
zámek součástí dodávky: | No |
pro přívěsy: | brzděné |
Be the first who will post an article to this item!
Add a comment
MB
Michal Boháček
MF
Marek Fischer
H
HURT s.r.o.
PH
Petr Hrbek
Měl jsem předvybrané dva vozíky. Na prodejně mi poradili, vše vysvětlili a s delším odstupem času od nákupu mohu potvrdit, že ve všem měli pravdu. S vozíkem jsem zatím maximálně spokojený a firmu PKTechnik Vám mohu rozhodně doporučit. Kvalita a zpracování vozíku je naprosto bezkonkurenční. Díky.
RM
Rudolf Merta
VN
Vladimír Nodžák
GW
Gordon Walter
Gute Produkte, schnelle Abwicklung und Lieferung😊👍
SP
SM produkt s.r.o.
LV
Loukotková Vanda
MS
Milan Svoboda
MA
MG Auto s.r.o.
Rychlé a vstřícné jednání.
KM
Kamil Mička
Vše proběhlo v pořádku. Vstřícný personál.
CP
CARAVAN Plus s.r.o.
MB
Michal Boháček
NH
Nguyen Cong Hoan
I
M interiéry s.r.o.
JC
Jaroslav Chvátal
B
Balbínka s.r.o.
MS
MEDWORLD, spol. s r.o.
G
GAREMA s.r.o.
velmi spokojen
Related products
Alternative products
Last viewed