Stabilizer Winterhoff WS 3000 D + ROBSTOP lock, bore KH12/12/12 mm

The Winterhoff WS 3000 stabiliser is a stabiliser coupling for trailers with a maximum technically permissible weight of up to 3000 kg. Option for attachment with two M12 horizontal screws or two M12 cross screws (front screw horizontally + rear screws vertically).

• Allows for safer driving at higher speeds, reduces trailer oscillation and vibration while driving.
• For use on trailers weighing at least 200 kg.
• Stabilization of unwanted trailer swings is ensured by the ball stud being retracted by two friction segments located in the axis of the direction of travel.
• Stabilizing couplings are used exclusively dry (without the use of lubricants). ATTENTION!!! When using a stabilizing clutch on a lubricated ball stud, the friction segments will be degraded and the stabilizing effect will be significantly reduced.
• The Winterhoff WS 3000 stabiliser joint is equipped with a correct connection indicator and a wear indicator for the ball coupling and friction segments.
• The stabilising coupling joint is supplied complete with fasteners and spacers for use on various drawtube diameters.
• The friction segments are replaceable and their wear rate can be monitored externally without the need for disassembly.
• Note: The use of stabilizing couplings is not suitable on balls attached to the hitch bracket with a single vertical bolt. The moment the friction segments grip the ball tightly and there is a slight sideways rotation during travel, the vertical bolt could be released from the bracket.
• Weight: 5.8 kg

Package contents:

• • 1x stabilizer Winterhoff WS 3000
  • 1x ROBSTOP lock with two keys
  • 2x M12 hexagon head screw
  • 2x self-locking nuts M12
  • 2x saddle pad
  • 2x pins for securing the shock absorber. brakes against ejection
  • 1x Winterhoff Safety Ball
  • 1x Winterhoff ball cap
  • 1x cuff