Stabilizer AL-KO AKS 3004

AL-KO AKS™ 3004 is a stabilizing coupling joint for trailers with the highest technically permissible/permitted weight.

• Allows for safer driving at higher speeds, reduces trailer oscillation and vibration while driving.
• Stabilization of unwanted trailer swings is ensured by the ball stud being retracted by four friction segments. Two are located in the axis of the direction of travel, and two in the axis perpendicular to the direction of travel.
• Stabilizing couplings are used exclusively dry (without the use of lubricants). ATTENTION!!! When using a stabilizing clutch on a lubricated ball stud, the friction segments will be degraded and the stabilizing effect will be significantly reduced.
• The AL-KO AKS™ 3004 stabilizer joint is equipped with a correct connection indicator and a wear indicator for the ball joint and friction segments.
• When the coupling joint is fitted to the ball and the control lever is depressed, the friction segments are pressed against the ball stud with a force of up to 320 ^Nm2, effectively limiting trailer oscillation from the start of the journey.
• The stabilising coupling joint is supplied complete with fasteners and spacers for use on various drawtube diameters.
• It can be mounted on 50 mm diameter pulling pipes of ramp brakes as standard, and with the use of the included spacers also on 35 mm, 40 mm and 45 mm diameters.
• The friction segments are replaceable and their wear rate can be monitored externally without the need for disassembly.
• As an optional accessory, you can purchase the AL-KO Safety Compact lock, or the top-of-the-line AL-KO Safety Plus lock with protection against cylinder drilling, see related products below.
• Note: The use of stabilizing couplings is not suitable on balls attached to the hitch bracket with a single vertical bolt. The moment the friction segments grip the ball tightly and there is a slight sideways rotation during travel, the vertical bolt could be released from the bracket.
• Stabilizer weight: 4.2 kg. Set weight: 4.8 kg

Package contents:

• • 1x stabilizer AL-KO AKS 3004
  • 4x spacer (for mounting on 35 mm or 45 mm diameter)
  • 2x screw M12 with torx head T55 (for horizontal mounting)
  • 1x M12 square head screw (for vertical mounting)
  • 2x M12 lock nut
  • 1x saddle pad (for vertical mounting)
  • 1x Pulling tube sleeve for 35 mm diameter
  • 1x anti-slip cuff clamp for pipe diameter 35 mm
  • 2x pins for securing the shock absorber. brakes against ejection