Brake pads Z-TRAILER AT27 and AT30, KNOTT 200x50, axle set

Large service set of original KNOTT brake shoes for wheel units 20-2425/1 (drum inner diameter 200 mm, shoe width 50 mm) and accessories. These jaws are mounted on axles GB 8, GB10, GB 13, VGB 8, VGB 10, VGB 13.

The set includes:

• 2 pcs leading jaw
• 2 pieces of running jaw including the installed automatic reversing mechanism with Backmat springs
• 2 pcs short tension spring
• 2 pcs long tension spring
• 2 pcs compression cone spring
• 2 spacers
• 2 pcs center nut
• 2 pcs of adjustment screws
• 2 pcs of adjusting wedges
• 4 pcs adjustment wedge (guide)

This is a two wheel service kit.

Do you need to identify the type of axle on your trailer? You have the following options:

1) in the note of the large technical license, the type of used axle and overrun brake, possibly also the type of wheel unit, is written

2) you can also find the axle type on the axle label, unfortunately the label is hard to read on older trailers

3) On the center cap of the wheel hub, you will find a pressed text logo of the axle manufacturer (KNOTT or AL-KO). These jaws are used on KNOTT axles for VAPP trailers types PA 2.0 to PA 2.6, PAL 2.0 to PAL 2.6, PAV 2.0 to PAV 2.6, PALV 2.0 to PALV 2.6, PV 2.0 to PV 2.6 and PVV 2.0 to PVV 2.6 including variants with reduced total weight.

ATTENTION!!! These brake shoes cannot be used for axles or AL-KO wheeled units.