Brake lining Z-TRAILER AT27, AT30, KNOTT 200x50, large axle set

Large service set of original brake shoes KNOTT for wheel units 20-2425/1 (inner drum diameter 200 mm, shoe width 50 mm) and accessories. These jaws are fitted on GB 8, GB10, GB 13, VGB 8, VGB 10, VGB 13 axles.

The set includes:

• 2 pcs leading jaw
• 2 pcs. running jaw including fitted automatic reversing mechanism with Backmat springs
• 2 pcs short tension spring
• 2 pcs long tension spring
• 2 pcs compression cone spring
• 2 pcs spacer
• 2 pcs center nut
• 2 pcs adjustment screws
• 2 pcs adjustment wedge
• 4 pcs adjusting wedge (guide)

This is a service kit for two wheels.

Need to identify the type of axle on your trailer? You have these options:

(1) the type of axle and ramp brake used and, if applicable, the type of wheel unit are entered in the note of the large technical certificate

2) you can also find the axle type on the axle plate, unfortunately the plate is usually hard to read on older trailers

3) On the center cap of the wheel hub you will find the embossed text logo of the axle manufacturer (KNOTT or AL-KO). These jaws are used on axles KNOTT on trailers VAPP types PA 2.0 to PA 2.6, PAL 2.0 to PAL 2.6, PAV 2.0 to PAV 2.6, PALV 2.0 to PALV 2.6, PV 2.0 to PV 2.6 and PVV 2.0 to PVV 2.6 including variants with reduced total weight.

ATTENTION!!! These brake shoes cannot be used with axles or wheel units AL-KO.