Axle KNOTT VGB 13 (1350 kg) b= 800 mm, c=1250 mm, 200x50, 112x5

The axle is delivered without cable ducts and wheel bolts. You will find suitable cable guides and wheel bolts in the related products below. Select wheel bolts according to the bolt seating area specification of your wheels. Using a wheel bolt with an inappropriate seating surface may cause the bolt to loosen during driving. Always use new wheel bolts for a new axle. Do not lubricate the wheel bolts with oil or other lubricating grease.

Recommended cable length for a single-axle trailer:

2 pcs length of bovden 530 mm

Recommended lengths of cable ducts for a two-axle trailer:

front axle: 1 pc length of bovden 830 mm, 1 pc length of bovden 930 mm

rear axle: 2 pcs. length of bovden 1430 mm

Lanyards with a quick-fit end (so called lens) cannot be used in combination with the old type of rocker arms without a side grommet for inserting the quick-fit rope. For these older types of rocker arms, which have only a hole without a side section for mounting the ropes, it is necessary to use rope cables with M8 thread.

We recommend using only original KNOTT cable guides with a Teflon insert (black Bowden sheathing) or original KNOTT cable guides with a Teflon insert and stainless steel cable (blue Bowden sheathing). The production of original cable ducts KNOTT is strictly controlled in terms of the quality of the materials used, the quality and precision of production, and the strength and safety of the final product. Original cable guides KNOTT guarantee safe and trouble-free operation of the brake system.

Warning: There are imitations of the original cable guides KNOTT on the market, both in black and blue Bowden sheathing, made from different materials and types of cables. Any brake system malfunction or consequential damage caused by the use of such non-original brake cables is not covered by the warranty.