Double-acting gas-liquid shock absorber for overrun brake AL-KO type 161S (up to 1600 kg total trailer weight). The shock absorber is housed inside the draw tube of the ramp brake and ensures smooth braking and unbraking of the trailer. Damping is effective in both directions of movement - compression and extension. The compressed shock absorber expands slowly under its own power.
When replacing the shock absorber, we recommend checking the stop ring fitted at the end of the drag tube and adjusting the wheel brakes. Have the brake system adjusted regularly, too much brake system play will significantly reduce the life of the ramp brake damper.
The total length of the shock absorber is 53 cm (the total length may vary slightly from piece to piece). One side is finished with an eye with a silentblock for the M12 screw, the other side is finished with a perpendicular 54 mm long tube for the M12 screw.
| Category: | Trailer overrun brake dampers |
|---|---|
| Weight: | 1 kg |
Be the first who will post an article to this item!