Towbar AL-KO AK 7-A, 750 kg, 35 mm, V12

Tow ball coupling AL-KO for unbraked trailers up to 750 kg For mounting on a log with a diameter of 35 mm Drilling for M12 screws horizontally at a spacing of 54 mm (screws are not included in the delivery) The coupling is equipped with a wear indicator for the joint and a manual pressure safety device There is a hole in the control handle for inserting a WW DBS 8/AK 7 lock (the lock is not included in the delivery, it can be ordered separately) A so-called soft box - rubber protection of the front edge - can be purchased for the tow coupling. The rubber front edge protection reduces the risk of damage to the painted bumper of the towing vehicle if the trailer is handled carelessly. It can also be useful in the event of unintentional foot contact with the drawbar clutch, etc. Red plastic indicator under the operating handle indicates an unclosed drawbar coupling - text OPEN visible When the towing clutch is closed, the visible part of the indicator remains with the "+" and "-" signs indicating the degree of wear on the coupling. As the wear rate of the ball coupling progresses - i.e. both the coupling and the ball coupling - the indicator decreases towards the "-" sign If the indicator is not visible after closing, the ball coupling is worn and the worn parts - either the coupling or the ball or both - must be replaced. To ensure a long service life of the towing clutch, we recommend that you regularly clean and re-lubricate the car's tow ball and towing clutch of any residual petroleum jelly and dirt. You will find a suitable lubricating grease in the related products. The mounting of moving parts on the pins is suitable for ensuring smooth closing and opening. Regularly lubricate with thin oil or spray lubricant containing PTFE. Manufacturer: AL-KO maximum trailer weight: 750 kg maximum permitted vertical load: 75 kg D/Dc value: 7.19 kN for a ball with a diameter of: 50 mm material: sheet metal holes for horizontal mounting: yes holes for vertical mounting: no holes for cross mounting: no holes for screws: M12 tightening torque: 75 Nm homologation: E1 55R-010164 lock included in delivery: no mounting on a pipe with a diameter of: 35 for trailers: unbraked