Standard 800 kg towing coupling for unbraked trailers. Designed to be mounted on a 70 mm wide quadrant. The operating handle is equipped with a push lock and a hole for the WW DBS 8/AK7 lock.
The clutch is self-adjusting and does not need to be adjusted during its service life. The wear rate of the drawbar clutch or ball stud is displayed on the clear side indicator.
- drilling: diameter 11 mm (for M10 screws)
- the spacing of the mounting holes is 90 mm
REMEMBER: Regular lubrication and cleaning will significantly extend the life of the ball coupling.
| Category: | Tow ball couplings |
|---|---|
| Weight: | 1 kg |
| hodnota D/Dc: | 7.7 |
| materiál: | sheet metal |
| maximální hmotnost přívěsu (kg): | 800 |
| maximální povolené svislé zatížení (kg): | 75 |
| otvory pro uchycení: | 2x vertically |
| pro kouli o průměru (mm): | 50 |
| pro profil: | yelled |
| pro přívěsy: | unbridled |
| rozteč montážních šroubů/otvorů (mm): | 90 |
| vertical screw size: | M10 |
| zámek součástí dodávky: | No |
| mounting on steel width (mm): | 70x70mm |
Be the first who will post an article to this item!
Add a comment