Class A50-X coupling ball, AL-KO BC75/200 EA 90, ISO 50, 50 mm, 3500 kg (not suitable for stabilizer)
Coupling ball class A50-X, with flange EA90, for fixing with two M16 bolts, suitable for towing vehicles with a maximum permissible weight of up to 3,400 kg. Screws, fan washers and M16 nuts for fixing are not included. The length of the bolts should be chosen according to the thickness of the material of the bracket to which the ball is bolted.
Coupling ball class A50-X, with flange EA90, for fixing with two M16 bolts, suitable for towing vehicles with a maximum permissible weight of up to 3,400 kg. When used on vehicles with a maximum permissible weight higher than this, the maximum permissible load derived from parameter D must be respected:
D = (mA x mP)/(mA + mP) x 9.81/1000, where mA is the maximum permissible towing mass in kg and mP is the maximum permissible trailer mass in kg
For example, when mounting this ball on a towing vehicle with a maximum permissible weight of 13t, a trailer weighing a maximum of 2t can be connected, or a trailer weighing a maximum of 2.5t can be mounted behind a 5.5t towing vehicle, and a maximum trailer load of 3500kg can be used with this ball after a 3.4t vehicle.
Screws, fan washers and M16 nuts for fixing are not included. The length of the bolts should be chosen according to the thickness of the material of the bracket to which the ball is bolted.
Parameters:
| for max. trailer weight: | 3500 kg |
| max. vertical load (S): | 200 kg |
| ref. force D | 17 kN |
| flange spacing: | 90mm |
| diameter of mounting holes: | 17 mm |
| total flange width: | 130mm |
| center of the sphere: | 75 mm (from the flange seating surface) |
| homologation: | e2*55R-01 12208 |
| ball diameter | 50mm |
| Category: | Tow balls |
|---|---|
| Weight: | 1.1 kg |
Be the first who will post an article to this item!