| Manufacturer: | Sport yacht |
|---|---|
| Part ID: | Z-KP03 |
| Order number: | 80041 |
- The lock is inserted into the hole in the operating handle of the ball coupling. In order for the lock to be inserted and locked in the hole, the pulling clutch must be closed either on the ball or empty. The lock prevents the pulling clutch from being opened by the operating handle.
- For greater safety and comfort when locking an unhitched trailer, we recommend using the AL-KO Safety Ball or KNOTT safety insert, which is inserted into the towing hitch instead of the car's towing device ball. This makes it easier to close the towing clutch before locking and prevents a locked towing clutch from being fitted to a specially modified towing device (with a significantly reduced or otherwise modified ball).
- The lock can also be used on the trailer while the vehicle is in motion.
- Designed for Sport Yacht KP-03 towing couplings. Caution, cannot be used on other pulling clutches!
- Package includes lock and two keys
- Note: The original locks for the KP-03 towbar from the manufacturer FAB are no longer manufactured. The currently offered product is a replacement with greater manufacturing tolerances. KP-03 pulling couplings have been manufactured since the last century and the manufacturing process has remained practically unchanged since then, which is also reflected in a lower manufacturing accuracy than modern pulling couplings. If both the lock and the KP-03 pulling clutch are within the manufacturing tolerances, the lock may not fit the pulling clutch exactly and it may not be possible to lock the lock in the clutch. In this case, it is necessary to lightly knock off the locking pin of the lock with a file at the point where its contact with the pulling clutch prevents the pin from moving during the tamping.
| Category: | Securing your trailer |
|---|---|
| Weight: | 1 kg |
Be the first who will post an article to this item!
Add a comment