Steel rope for winch 10 m, 6 mm
The galvanised steel rope for hand winches 500 to 900 kg is fitted with a galvanised carabiner hook at one end for easy attachment of the load to be pulled. The rope is constructed of round strands DIN 3060 in the composition 6x19.
- Length: 10 m
- Diameter: 6 mm
- breaking strength: 24000 N
- wire strength: 1770 N/mm2
- for winches 500 to 900 kg
The galvanised steel rope for hand winches 500 to 900 kg is fitted with a galvanised carabiner hook at one end for easy attachment of the load to be pulled. The rope is constructed of round strands DIN 3060 in the composition 6x19. Thanks to the textile insert, this steel rope is soft, easily flexible with excellent resistance to breakage. Compared to ropes with steel inserts, soft ropes are easier to handle and easier to straighten when unwinding.
- Length: 10 m
- Diameter: 6 mm
- breaking strength: 24000 N
- wire strength: 1770 N/mm2
- for winches 500 to 900 kg
For intensive daily full loads , we recommend the use of 7 mm rope for 900 kg winches. A thicker rope is better able to withstand the wear and tear of frequent bending and breaking in everyday use.
Note: Over time, the rope strands gradually degrade due to use and environmental influences. It is recommended to replace the rope with any damaged strands or partially broken wires with a new one immediately. The rope is not intended for securing loads on the loading area of the vehicle.
The rope design conforms to DIN EN 12385-1/2 and DIN EN 10264-1/2.
| Category: | Ropes and straps for winches |
|---|---|
| Weight: | 1 kg |
| celková délka (m): | 10 |
| celková délka (mm): | 10 |
| jmenovitá pevnost drátů (N/mm2): | 1770 |
| pro navijáky: | 500 až 900 kg |
| průměr lana (mm): | 6 |
| síla zlomu (N): | 24000 |
Be the first who will post an article to this item!
