Steel rope for winch 10 m, 4 mm, AL-KO
- Length: 10 m
- Diameter: 4 mm
- wire strength: 1960 N/mm2
- for winches 250 to 350 kg
Rope AL-KO 10 m, cross-section 4 mm, primarily for the winch AL-KO OPTIMA 351 , including hook.
The galvanized steel rope for hand winches 250 to 350 kg is fitted with a galvanized carabiner hook at one end for easy attachment of the load to be pulled. The rope is constructed of round strands DIN 3060 in the composition 6x19. Thanks to the textile insert, this steel rope is soft, easily flexible with excellent resistance to breakage. Compared to ropes with steel inserts, soft ropes are easier to handle and easier to straighten when unwinding.
- Length: 10 m
- Diameter: 4 mm
- wire strength: 1960 N/mm2
- for winches 250 to 350 kg
Note: Over time, the rope strands gradually degrade due to use and environmental influences. It is recommended to replace the rope with any damaged strands or partially broken wires with a new one immediately. The rope is not intended for securing loads on the loading area of the vehicle.
| Category: | Ropes and straps for winches |
|---|---|
| Weight: | 1 kg |
| celková délka (m): | 10 |
| celková délka (mm): | 10 |
| jmenovitá pevnost drátů (N/mm2): | 1960 |
| pro navijáky: | 250 až 350 kg |
| průměr lana (mm): | 4 |
Be the first who will post an article to this item!
