Rope to winch 10m, diameter 7mm, including hook, AL-KO
The galvanized steel rope for hand winches from 900 to 1200 kg is equipped with a galvanized carabiner hook at one end for easy attachment of the towed load.
The galvanized steel rope for hand winches from 900 to 120 kg is equipped with a galvanized carabiner hook at one end for easy attachment of the towed load.
For intensive daily full loads, we recommend for 900 kg winches to use a rope dia. 7 mm. A stronger rope is more resistant to wear and tear due to frequent bending and breaking in daily use.
Note: Over time, due to the use of the rope and the influence of the environment, the strands of the rope gradually degrade. We recommend that ropes with damaged strands or partially broken wires be immediately replaced with new ones. The rope is not intended to secure loads on the vehicle bed.
| total length: | 10 m |
|---|---|
| rope diameter: | 7 mm |
| for winches: | 900 to 1200 kg |
| nominal strength of wires: | 1770 N/mm2 |
| Part ID: | 7mm/10 |
| Order number: | 400471 |
Winch rope 7 mm/10 m (including hook)
| Category: | Ropes and straps for winches |
|---|---|
| Weight: | 1 kg |
| celková délka (m): | 10 |
| celková délka (mm): | 10 |
| jmenovitá pevnost drátů (N/mm2): | 1770 |
| pro navijáky: | 900 až 1200 kg |
| průměr lana (mm): | 7 |
Be the first who will post an article to this item!
