Rope to winch 10m, diameter 6mm, including hook, AL-KO
The galvanized steel rope for hand winches from 500 to 900 kg is equipped with a galvanized carabiner hook at one end for easy attachment of the towed load. The rope is constructed from DIN 3060 circular strands in the composition 6x19. Thanks to the textile insert, this steel rope is soft, easily flexible with excellent resistance to breakage. Compared to ropes with a steel core, soft rope is easier to handle and straightens better when unwinding.
The galvanized steel rope for hand winches from 500 to 900 kg is equipped with a galvanized carabiner hook at one end for easy attachment of the towed load. The rope is constructed from DIN 3060 circular strands in the composition 6x19. Thanks to the textile insert, this steel rope is soft, easily flexible with excellent resistance to breakage. Compared to ropes with a steel core, soft rope is easier to handle and straightens better when unwinding.
The production of the rope corresponds to DIN EN 12385-1/2 and DIN EN 10264-1/2.
For intensive daily full loads, we recommend for 900 kg winches to use a rope dia. 7 mm. A stronger rope is more resistant to wear and tear due to frequent bending and breaking in daily use.
Note: Over time, due to the use of the rope and the influence of the environment, the strands of the rope gradually degrade. We recommend that ropes with damaged strands or partially broken wires be immediately replaced with new ones. The rope is not intended to secure loads on the vehicle bed.
| Rope length: |
10 meters |
| Rope diameter: | 6 mm |
| Nominal strength of wires: | 1770 N/ mm2 |
| Breaking strength: | N24,000 |
| Category: | Ropes and straps for winches |
|---|---|
| Weight: | 1 kg |
Be the first who will post an article to this item!
