Wheel bolt M12x1.5x24 cone head, for 19 mm wrench

Not rated

Brand: KNOTT

Code: 150159

Přidat k porovnání

Availability	WAREHOUSE headquarters
Delivery offer
Code:	150159

€1 / pcs €1 excl. VAT

Wheel bolt M12x1.5x24 cone head, for 19 mm wrench

Not rated

Brand: KNOTT

Code: 150159

Wheel bolt M12x1.5x24 cone head, for 19 mm wrench

Description

Screw M12x1,5x24 with tapered seating surface and hexagonal head for fixing the wheel disc to the axle hub.
Suitable for example for axles AL-KO and KNOTT up to a load capacity of 1800 kg per axle.
The bolt is intended for use only with discs with a corresponding hole and tapered seating surface for the bolt. The use of screws with an unsuitable seating surface (e.g. tapered screws for discs with a spherical seating surface) is unacceptable - besides damaging the seating surface for the screw, the screws may loosen spontaneously during the ride and the wheel may become loose.
The screw has a hexagonal head for tightening with a 19 mm wrench
Strength class 8.8.
Surface treatment with galvanic zinc plating.
The 24 mm thread length is suitable for use in combination with metal discs. For ALU discs, it is usually necessary to choose a longer bolt length according to the disc manufacturer's recommendations because of the greater thickness of the disc at the bolt passage.
Unless otherwise specified by the vehicle manufacturer, the recommended tightening torque is 90 Nm.
It is recommended to tighten the wheel bolts crosswise - always. This ensures an even distribution of force and proper wheel fitting.

Category:	Bicycle accessories
Weight:	0.1 kg
hmotnost (kg):	0,1

Be the first who will post an article to this item!

Add a comment

Petr Hrbek | 17/03/2025

Měl jsem předvybrané dva vozíky. Na prodejně mi poradili, vše vysvětlili a s delším odstupem času od nákupu mohu potvrdit, že ve všem měli pravdu. S vozíkem jsem zatím maximálně spokojený a firmu PKTechnik Vám mohu rozhodně doporučit. Kvalita a zpracování vozíku je naprosto bezkonkurenční. Díky.