Wheel bolt M12x1.5x24 cone head, for 19 mm wrench
Screw M12x1,5x24 with tapered seating surface and hexagonal head for fixing the wheel disc to the axle hub, for tightening with a spanner 19 mm. Suitable for example for axles AL-KO and KNOTT up to a load capacity of 1800 kg per axle. Surface treatment with galvanic zinc plating.
- Surface treatment by galvanic galvanization
- The screw has a hexagonal head for tightening with a wrench 19 mm
- Suitable for example for axles AL-KO and KNOTT up to a load capacity of 1800 kg per axle
- Unless otherwise specified by the vehicle manufacturer, the recommended tightening torque is 90 Nm
- Screw M12x1,5x24 with tapered seating surface and hexagonal head for attaching the wheel disc to the axle hub
- It is recommended to tighten the wheel bolts crosswise - always. This ensures an even distribution of force and proper wheel fitting
- The 24 mm thread length is suitable for use in combination with metal discs. For ALU discs, it is usually necessary to choose a longer screw length according to the disc manufacturer's recommendations because of the greater thickness of the disc at the screw passage point
- The screw is intended exclusively for use with discs with a corresponding hole and ball screw seating surface. The use of a bolt with an unsuitable seating surface (e.g. tapered bolts for discs with a spherical seating surface) is unacceptable - apart from damaging the seating surface for the bolt, the bolts may loosen spontaneously during driving and the wheel may come loose
| Category: | Bicycle accessories |
|---|---|
| Weight: | 0.1 kg |
Be the first who will post an article to this item!
Add a comment