Wheel bolt M12x1.5x24 ball head, for 19 mm wrench
Přidat k porovnání
Screw M12x1,5x24 with ball seating surface and hexagonal head for fixing the wheel disc to the axle hub, for tightening with a spanner 19 mm. Suitable for example for axles AL-KO and KNOTT up to a load capacity of 1800 kg per axle. Surface treatment with galvanic zinc plating.
- Surface treatment by galvanic galvanization
- The screw has a hexagonal head for tightening with a wrench 19 mm
- Suitable for example for axles AL-KO and KNOTT up to a load capacity of 1800 kg per axle
- Unless otherwise specified by the vehicle manufacturer, the recommended tightening torque is 90 Nm
- Screw M12x1,5x24 with ball seating surface and hexagonal head for attaching the wheel disc to the axle hub
- It is recommended to tighten the wheel bolts crosswise - always. This ensures an even distribution of force and proper wheel fitting
- The 24 mm thread length is suitable for use in combination with metal discs. For ALU discs, it is usually necessary to choose a longer screw length according to the disc manufacturer's recommendations because of the greater thickness of the disc at the screw passage point
- The screw is intended exclusively for use with discs with a corresponding hole and ball screw seating surface. The use of a bolt with an unsuitable seating surface (e.g. tapered bolts for discs with a spherical seating surface) is unacceptable - apart from damaging the seating surface for the bolt, the bolts may loosen spontaneously during driving and the wheel may come loose
Category: | Bicycle accessories |
---|---|
Weight: | 0.1 kg |
EAN: | 1501580000002 |
Be the first who will post an article to this item!
Add a comment
MN
Marcel Náprava
JV
Josef Vacek
Já tedy moc nehodnotím, ale tady musím udělat výjimku. Jsem velmi spokojen, prodejci jsou prostě profesionálové. Prives vypadá velmi kvalitně, mám ho zatím chvíli, ale jsem nadšený. Pět hvězdiček z pěti!
T
Topeni-Thermotec s.r.o.
FS
Firma Stašo
Veľmi spokojný. Príjemný ľudia a profesionálny prístup.
Trailer vyzerá byť kvalitný, uvidíme časom.
Vďaka.
ZS
Zuzana Svádová
JV
Jan Vondruška
👍👍👍
JJ
Jaroslav Janoušek
Jsem opravdu velice spokojen s výběrem přívěsu a hlavně s výběrem prodejce.
Děkuji moc všem v PK za vše.
Když budu v budoucnu cokoliv potřebovat ohledně přívěsu, vždy zvolím firmu PK
PT
Pegas Tilers s.r.o.
Jako vždy služby na nejvyšší úrovni 👍
MB
Michal Boháček
MF
Marek Fischer
H
HURT s.r.o.
PH
Petr Hrbek
Měl jsem předvybrané dva vozíky. Na prodejně mi poradili, vše vysvětlili a s delším odstupem času od nákupu mohu potvrdit, že ve všem měli pravdu. S vozíkem jsem zatím maximálně spokojený a firmu PKTechnik Vám mohu rozhodně doporučit. Kvalita a zpracování vozíku je naprosto bezkonkurenční. Díky.
RM
Rudolf Merta
VN
Vladimír Nodžák
GW
Gordon Walter
Gute Produkte, schnelle Abwicklung und Lieferung😊👍
SP
SM produkt s.r.o.
LV
Loukotková Vanda
MS
Milan Svoboda
MA
MG Auto s.r.o.
Rychlé a vstřícné jednání.
KM
Kamil Mička
Vše proběhlo v pořádku. Vstřícný personál.
PT
PK TECHNIK s.r.o.
(Administrator)
Dobrý den, Vážený pane Janoušku,
moc děkujeme za krásné hodnocení, a budeme se těšit na další návštěvu :-).
Related products
Alternative products
Last viewed