Locking pin with spring (for welding)
The spring-loaded locking pin can be used to lock various moving parts. When closed, a pin protrudes from the tubular housing in the front part. When the handle is pulled backwards against the spring resistance, the pin is inserted into the tubular housing. When the handle is released, the spring will again extend the pin. By turning the handle half a turn in the extended position, the pin can be locked in the open position.
The spring-loaded locking pin can be used to lock various moving parts. When closed, a pin protrudes from the tubular housing in the front part. When the handle is pulled backwards against the spring resistance, the pin is inserted into the tubular housing. When the handle is released, the spring will again extend the pin. By turning the handle half a turn in the extended position, the pin can be locked in the open position.
The surface treatment is made by galvanizing.
Product weight: 0.135 kg
| Category: | Trailer sidewall accessories |
|---|---|
| Weight: | 1.1 kg |
Be the first who will post an article to this item!
Marek Fischer
HURT s.r.o.
Petr Hrbek
Rudolf Merta
Vladimír Nodžák
Gordon Walter
SM produkt s.r.o.
Loukotková Vanda
Milan Svoboda
MG Auto s.r.o.
Kamil Mička
CARAVAN Plus s.r.o.
Michal Boháček
Nguyen Cong Hoan
M interiéry s.r.o.
Jaroslav Chvátal
Balbínka s.r.o.
MEDWORLD, spol. s r.o.
GAREMA s.r.o.
Lešánek & Mráz - kamionová doprava, s.r.o.
Sledujte nás na Instagramu