Wiring harness 4.55 m/7-pole - plug, with front terminals QS75, baj5, VAPP

• Complete wiring harness for trailers, which greatly facilitates the installation of electrical wiring.
• Two branches of 5x0.5 ^mm2 and 4x0.5 ^mm2 cables (left and right) with a length of 4550 mm are led from the seven-pin plug.
• Both branches are terminated with 5-pin Jokon compatible bayonets (yellow on the left and green on the right) for easy and quick connection of compatible flashlights.
• Each bayonet also has a two-core 2x0.75 ^mm2 flat cable with a length of 3150 mm, which can be used to mount front, side or additional marker lamps using QS75 couplers and is terminated with two standard Faston 6.3 mm flat connectors
• Compared to the thirteen-tip version, this wiring does not lead to the reversing light function.
• Left rear bayonet connector: five-pole (turn signal, brake, taillight, fog light, skeleton), yellow
• Right rear bayonet connector: five-pole with four pins connected (turn signal, brake, end, carcass), colour green

QS coupling usage diagram:

Connecting the SNAP-IN terminal:

pin marked "+": brown wire (alternatively black)

pin marked "-": blue wire (alternatively white)