Rubber cuff AL-KO 60S/2 and 90S/3 with pull rod dia. 35 mm

The original rubber boot AL-KO is designed for overrun brakes 60S/2 and 90S/3 with a 35 mm diameter pull tube. The sleeve protects the extended part of the towing tube from weather and dirt. We recommend replacing a cracked or otherwise damaged cuff immediately. A rusted or dirty, unprotected towing tube will quickly damage the ramp brake bushings.

The rear side of the cuff is fitted with a protrusion on the inside for insertion into the groove of the ramp brake bushing (the diameter of the bushing inside the groove for fitting the cuff is 42 mm). The front side of the cuff seals directly to the towing tube, the upper part of the cuff fits over the small protrusion of the towing coupling. The length of the cuff in the extended working position on the ramp brake is 10.5 cm).