- Central self-locking nut for wheel unit hubs AL-KO 1637 and AL-KO 2051 with double row ball bearing
- The nut is designed for one-time assembly. A new nut must be used after disassembly. When the nut is reused, sufficient securing of the hub is not guaranteed.
- The prescribed tightening torque of 280 - 300 Nm must be observed. Incorrect tightening torque can result in bearing damage or hub loosening.
- Tightening the nut to the specified tightening torque automatically defines the clearance of the double row hub bearing.
- The nut is not intended for hubs AL-KO equipped with two tapered roller bearings or hubs from other manufacturers.
- We recommend that the installation be entrusted to a trained AL-KO service center.
- Outside diameter of the nut 50 mm, nut height 18 mm.
Category: | Trailer bearings |
---|---|
Weight: | 1 kg |
utahovací moment: | 280 - 300 Nm |
závit: | M24 |
stoupání: | 1.5 |
velikost klíče (mm): | 32 |
Be the first who will post an article to this item!
Add a comment
MF
Marek Fischer
H
HURT s.r.o.
PH
Petr Hrbek
Měl jsem předvybrané dva vozíky. Na prodejně mi poradili, vše vysvětlili a s delším odstupem času od nákupu mohu potvrdit, že ve všem měli pravdu. S vozíkem jsem zatím maximálně spokojený a firmu PKTechnik Vám mohu rozhodně doporučit. Kvalita a zpracování vozíku je naprosto bezkonkurenční. Díky.
RM
Rudolf Merta
VN
Vladimír Nodžák
GW
Gordon Walter
Gute Produkte, schnelle Abwicklung und Lieferung😊👍
SP
SM produkt s.r.o.
LV
Loukotková Vanda
MS
Milan Svoboda
MA
MG Auto s.r.o.
Rychlé a vstřícné jednání.
KM
Kamil Mička
Vše proběhlo v pořádku. Vstřícný personál.
CP
CARAVAN Plus s.r.o.
MB
Michal Boháček
NH
Nguyen Cong Hoan
I
M interiéry s.r.o.
JC
Jaroslav Chvátal
B
Balbínka s.r.o.
MS
MEDWORLD, spol. s r.o.
G
GAREMA s.r.o.
velmi spokojen
L
Lešánek & Mráz - kamionová doprava, s.r.o.
Related products
Alternative products
Last viewed