Center nut, press-fit to axle AL-KO UBR700 with tapered bearings

Only for tapered roller bearings

• Center lock nut for non-braked hubs AL-KO with tapered roller bearings
• The nut is designed for one-time assembly. A new nut must be used after disassembly. When the nut is reused, sufficient securing of the hub is not guaranteed.
• It is necessary to follow the prescribed assembly procedure; tighten the nut to a torque of 40 - 45 Nm, then loosen the nut slightly (turn it back 180°) and secure it by splitting the nut edge with the appropriate product. An insufficiently tightened or incorrectly secured nut can result in bearing damage or hub loosening!
• The nut is not intended for hubs AL-KO equipped with double-row ball bearings or hubs from other manufacturers.
• We strongly recommend that the installation be entrusted to a trained AL-KO service.