License plate light (registration plate) LED WAS W88/730 (12-24V), rounded
License plate light ED WAS W88/730 (12-24V), rounded
- Thanks to LED technology, the flashlight is resistant to vibration and moisture. No more knocking on light bulbs.
- Supplied with 25 mm spacer (required for correct illumination of the registration plate).
- Sufficient luminous intensity with low current consumption
- The lamp automatically adapts to the vehicle's primary voltage of 12 V or 24 V
- There are two wires for connection of approx. 10 cm length with shielded ends
- For a registration plate of normal dimensions (520x120mm), two pieces of the lamp are mounted including the spacer, one on the left and one on the right of the RZ. Alternatively, a single lamp can be mounted without a spacer above the centre of the registration plate. In both cases it is necessary to observe the position of the lamp in relation to the registration plate, see the drawing in the product gallery.
- At the same time, the instructions must be followed of ECE/UN Regulation No 48 on the installation and positioning of lighting and light-signalling devices on vehicles.
- Package contains 1 piece of luminaire
| Category: | Licence plate lights |
|---|---|
| Weight: | 1 kg |
| délka kabelu (m): | 0.1 |
| hloubka (mm): | 59.6 |
| cover: | IP66/IP68 |
| materiál: | plast |
| osvětlení registrační značky: | ano |
| provedení lampy: | LED |
| provozní napětí: | 12-24V |
| rozteč montážních šroubů/otvorů (mm): | 70 |
| šířka (mm): | 58.5 |
| typ vstupu (připojení): | cable |
| uchycení svítilny: | 2x M4 screw |
| vyměnitelné sklo: | ne |
| výška (mm): | 101 |
Be the first who will post an article to this item!
Add a comment
