License plate light (registration plate) LED WAS W55/247 (12-24V) red
License plate light LED WAS W55/247 (12-24V) red
- Combination lamp with registration plate light and rear position lamp
- Due to the higher positioning of the source, the lamp does not need to be offset in height from the registration plate.
- Thanks to LED technology, the flashlight is resistant to vibration and moisture. No more knocking on light bulbs.
- Sufficient luminous intensity with low current consumption
- The lamp automatically adapts to the vehicle's primary voltage of 12 V or 24 V
- There are two wires for connection of approx. 10 cm length with shielded ends
- Two pieces of lamps, one on the left and one on the right of the RZ, are mounted to the registration plate of normal dimensions (520x120mm). It is necessary to observe the position of the lamp in relation to the registration mark, see the drawing in the product gallery.
- At the same time, the instructions must be followed of ECE/UN Regulation No 48 on the installation and positioning of lighting and light-signalling devices on vehicles.
- Package contains 1 piece of luminaire
| Category: | Licence plate lights |
|---|---|
| Weight: | 1 kg |
| délka kabelu (m): | 0.1 |
| hloubka (mm): | 61 |
| cover: | IP66/IP68 |
| materiál: | plast |
| osvětlení registrační značky: | ano |
| provedení lampy: | LED |
| provozní napětí: | 12-24V |
| rozteč montážních šroubů/otvorů (mm): | 85.5 |
| šířka (mm): | 55.5 |
| typ vstupu (připojení): | cable |
| uchycení svítilny: | 2x M5 screw |
| vyměnitelné sklo: | ne |
| výška (mm): | 109 |
| zadní obrysová svítilna: | ano |
Be the first who will post an article to this item!
Add a comment
