Tandem rocker KNOTT + connection. material
The tandem linkage is used to connect the four cable lines of the double-axle trailer to the central brake rod. Specially shaped mouldings together with ball nuts ensure maximum freedom in deflecting the rocker arms during operation.
The tandem linkage is used to connect the four cable lines of the double-axle trailer to the central brake rod. Specially shaped mouldings together with ball nuts ensure maximum freedom in deflecting the rocker arms during operation. The hole spacing of the tandem rocker arm KNOTT is standardized for axles KNOTT up to axle size GB18, respectively. VGB18 (trailers with a total weight of 3500 kg and two axles).
Note: Tandem rocker arm KNOTT cannot be used for axles AL-KO (different spacing of holes for attaching cable lines).
The tandem rocker arm is supplied with fasteners - ball nuts and locknuts for all 4 cables and for the central rod. Each ball nut is secured with one standard nut. After mounting the tandem rocker arm and adjusting it, it is necessary to carefully tighten all counter nuts against the ball nuts.
| Category: | Lanovody |
|---|---|
| Weight: | 1.04 kg |
Be the first who will post an article to this item!
Michal Boháček
Marek Fischer
HURT s.r.o.
Petr Hrbek
Rudolf Merta
Vladimír Nodžák
Gordon Walter
SM produkt s.r.o.
Loukotková Vanda
Milan Svoboda
MG Auto s.r.o.
Kamil Mička
CARAVAN Plus s.r.o.
Michal Boháček
Nguyen Cong Hoan
M interiéry s.r.o.
Jaroslav Chvátal
Balbínka s.r.o.
MEDWORLD, spol. s r.o.
GAREMA s.r.o.
Sledujte nás na Instagramu