Brake cable KNOTT stainless steel 1130/1320 mm, quick-mount (with lens)
Cable duct with stainless steel cable for axles KNOTT GB5 to GB18, VGB5 to VGB18 and GDB13 to GDB18. The bovden is lined with a Teflon tube in which the rope runs, the ends of the bovden are fitted with grease plugs before crimping. This ensures a long service life of the wire rope as well as smooth operation with minimal resistance. The stainless steel wire rope is suitable for all trailers operating in harsh conditions, especially for boat trailers, due to its corrosion resistance.
Quick-fit end cap with "lens" for quick and easy insertion of the end cap into the rocker arm.
It is recommended to change the quick-connect ducts all at once. When replacing only one brake cable, it is preferable to use a threaded cable (also available in our offer), where the length of the remaining older, already slightly stretched cables can be adjusted on the thread.
Recommended cable lengths for two-axle trailers VAPP (Bowden cable lengths in mm)
| mounting width | right ex. | left front | right back. |
left back. |
right back | left back |
| "b" axles | wheelbase 730 mm | wheelbase 930 mm | ||||
| 1100mm | 730 | 830 | 1430 | 1230 | ||
| 1300mm | 830 | 930 | 1430 | 1430 | 1630 | 1530 |
| 1400mm | 830 | 930 | 1430 | 1430 | ||
| 1500mm | 930 | 1030 | 1530 | 1530 | 1630 | 1630 |
| 1720mm | 1030 | 1230 | 1630 | 1530 | ||
| 1800mm | 1030 | 1230 | 1630 | 1630 | ||
| 1820mm | 1030 | 1230 | 1630 | 1630 | ||
Recommended cable lengths for single-axle trailers (bovden lengths in mm)
| mounting width | right | left |
| "b" axles | ||
| 1100mm | 730 | 730 |
| 1300mm | 830 | 830 |
| 1400mm | 930 | 930 |
| 1500mm | 930 | 930 |
| 1800mm | 1030 | 1030 |
| Category: | Lanovody |
|---|---|
| Weight: | 1.03 kg |
| zakončení: | Lens - imprint |
| Bowden cable length (mm): | 1130 |
| rope length (mm): | 1320 |
| outer diameter of the end cap at the plug (mm): | 22 |
| inner diameter of the end cap at the plug (mm): | 18.5 |
Be the first who will post an article to this item!
