Inverter charger GYSFLASH 101. 12 CNT (cables 5m)
GYSFLASH 101.12 CNT FV is a high-voltage connected charger 100 A with inverter technology from the French company GYS. It allows to maintain a 12 V lead or lithium battery at a perfectly stabilized voltage during the diagnostic phases. It will provide the best charging cycle recommended for the maintenance of the most advanced vehicles on the market. Thanks to the USB connection it is 100% customizable.
GYSFLASH 101.12 CNT FV is a high-voltage connected charger 100 A with inverter technology from the French company GYS. It allows to maintain a 12 V lead or lithium battery at a perfectly stabilized voltage during the diagnostic phases. It will provide the best charging cycle recommended for the maintenance of the most advanced vehicles on the market. Thanks to the USB connection it is 100% customizable.
4 Operating modes
- Charging: for 12 V lead acid or lithium (LFP) batteries from 5 to 1200 Ah.
- Diagnostic: supports up to 100 A for 12 V vehicle batteries in the diagnostic phase in maintenance workshops.
- Showroom: provides power compensation when using the showroom vehicle's electrical accessories. It also manages optimal battery charging.
- Tester: allows you to check the battery voltage, evaluate the starter system (starter + battery) and the state of the vehicle's alternator.
100% Connected
- Add, remove or edit USB charging modes and profiles.
- Configuration files tailored to your application.
- Read the charging history and data on the USB stick and use it in a spreadsheet.
- Connect additional modules (printer, barcode reader, etc.) via a dedicated module socket (SMC: Smart Module Connector)
Automatic charging
- Extends the life and performance of lead acid (gel, AGM, liquid, calcium, etc.) and lithium (LFP) batteries.
- Specific charging curve in 8 steps (lead) or 9 steps (lithium) without supervision.
- Recovers deeply discharged batteries > 2 V (automatic SOS recovery)
Technology and advanced features
- The "Auto-Detect" function automatically starts charging when a battery is connected to the charger.
- "Auto-Restart" function in case of power failure with memory settings.
- Cable test and calibration: can be equipped with 2x8m cables with a cross section of 16 mm².
- Locking prevents the risk of incorrect handling, ideal for garages and showrooms.
- Up to 11 charging profiles available, including the Easy profile for simplified charging, which is suitable for all lead-acid batteries
Safety
- Protection of the vehicle's on-board electronics: short-circuit, over-polarity and over-voltage protection. Spark prevention system.
- Interchangeable safety lock to protect against misuse.
- Temperature sensor to prevent the internal electronics from overheating.
Ergonomics
- Durable housing with shock and vibration absorbing pads.
- Low height (10.5 cm) for positioning under the vehicle.
Parameters
Charging cable length | 5m | |
Recharging traction batteries | YES | |
Car battery voltage | 12V | |
Charger power for charging | 1600W | |
Charging current - maximum | 100A | |
Car battery charging capacity | 5- 1200Ah | |
SOS regenerative charging program | YES | |
Fuse | 125 A | |
Protection class | IP 21 | |
Dimensions | 320 x 105 x 292 mm | |
Weight | 4.7kg |
Files
Download link for configuration software
Category: | Car battery chargers |
---|---|
Weight: | 6.5 kg |
Automatické nabíjení: | ANO |
Nabíjecí proud: | 110 A |
Ochrana - krytí: | IP 21 |
Ochrana proti přepolování: | ANO |
Nabíjení: | 230 V |
Vystupní napětí: | 12 V |
Kapacita akumulátoru: | 12V (5 -1200Ah) |
Nabíječka: | ze sítě 230V |
Be the first who will post an article to this item!