This ramp brake is designed for both top and bottom mounting on "V" shaped drawbar. The sturdy cast iron brake body is fitted with a metal handle on the top for easier grip when handling the trailer. On this type, two connected double-arm levers are used side by side in parallel, which ensure reliable transmission of braking force to the rod and cables during operation.
The brake is supplied complete including the K35-C ball clutch and the safety cable.
The front mounting holes are oval - allowing the brake to be used on trailers with front axle spacing from 120 mm to 140 mm. The distances of the centres of the holes in the antero-posterior direction are 166 mm and 207 mm measured always from the front hole.
for total trailer weight: 2700 to 3500 kg
max. permissible vertical load: 150 kg
combinable with bike units: KNOTT type 16-1365 (160x35), 20-2425/1 (200x50), 25-2025 (250x40) and 30-2261 (300x60)
| Category: | Brakes on "V" drawbar |
|---|---|
| Weight: | 1 kg |
| EAN: | 60011008 |
| maximální povolené svislé zatížení (kg): | 150 |
| drawbar mountable: | V-drawbar |
| for total trailer weight max. (kg): | 3500 |
| for total trailer weight min. (kg): | 2700 |
| for wheeled units: | KNOTT typ 16-1365 (160x35), KNOTT typ 20-2425/1 (200x50), KNOTT typ 25-2025 (250x40), KNOTT typ 30-2261 (300x60) |
| bottom mounting: | Yes |
| connecting device: | K35-C |
| top mounting: | Yes |
Be the first who will post an article to this item!
Translativa Group EooD
Marcel Náprava
Josef Vacek
Topeni-Thermotec s.r.o.
Firma Stašo
Zuzana Svádová
Jan Vondruška
Jaroslav Janoušek
Pegas Tilers s.r.o.
Michal Boháček
Marek Fischer
HURT s.r.o.
Petr Hrbek
Rudolf Merta
Vladimír Nodžák
Gordon Walter
SM produkt s.r.o.
Loukotková Vanda
Milan Svoboda
MG Auto s.r.o.
PK TECHNIK s.r.o.
(Administrator)
Sledujte nás na Instagramu