- Overrun brake AL-KO 200V (AE EURO-2 200V) 2nd generation for trailers equipped with wheel units AL-KO 2361 (inner drum diameter 230 mm) with automatic reversing
- Designed for trailers with maximum permissible weight from 1300 kg to 2000 kg
- The brake is equipped with an integrated 48 mm diameter support wheel holder on the left side
- The coupling for connection to the central brake rod has an M10 thread
- Rear oval mounting holes allow V-brakes to be fitted with arm angles from 22 to 34 degrees, front mounting holes 120 mm apart
- This ramp brake is often used on caravans in combination with the plastic cover Order No. 101904 (not included)
- The brake is supplied without a ball clutch. A pulling clutch can be fitted, e.g. AL-KO AK270 or stabilizer AL-KO AKS3004
- NOTE: The gear ratio of the overrun brake is fixed at 90:30 (for wheel units AL-KO 2361 ) and cannot be changed for other wheel units, e.g. 1637 or 2051. For smaller wheeled units it is necessary to order the brake version with a 90:27 overdrive ratio or for larger wheeled units with a 90:33.5 ratio.
| Category: | Brakes on "V" drawbar |
|---|---|
| Weight: | 1.01 kg |
| maximální povolené svislé zatížení (kg): | 100 |
| top mounting: | Yes |
| drawbar mountable: | V-drawbar |
| for total trailer weight max. (kg): | 2000 |
| for total trailer weight min. (kg): | 1300 |
| service number AL-KO (ETI): | 811611 |
| connecting device: | Without coupling device |
Be the first who will post an article to this item!
Add a comment