Brake shoes AL-KO 2360/2361 large set 46 for 2 wheels
So-called small set (Set 49) of original brake shoes AL-KO for wheel units type 2360 and 2361 (wheel units with inner drum diameter 230 mm, shoe width 60 mm).
The set includes:
- 4x brake shoe 2361
- 4x compression spring
- 4x lock washer for compression spring
- 2x tension spring
- 2x Rückmatic spring
- 1x right rear-mounted thumbscrew
- 1x thumb rückmatic left
- 2x thumb stud rückmatic
- 2x rückmatic thumb pin cotter pin
- 2x spacer 2361
- 2x cable connector - spacer
- 4x brake drum cap
- 2x adjusting nuts
- 2x caliper adjustment nut
- 2x flat spring for adjusting nut
- 2x cable tray
This is a set of jaws and springs for the jaws to two wheels.
The marking 1808747 can usually be found directly on the jaw. These jaws can be found on axles AL-KO B-1600 ("Plus" version 1600 kg) and B-1800. The B-1600 axles in the 1500 kg "Compact" version are fitted with smaller 2051 wheel units. Most trailer manufacturers indicate the type of wheel units used in a note on the technical certificate.
Do you need to identify the type of axle on your trailer VAPP? You have these options:
- the note on the large technical certificate indicates the type of axle and ramp brake used and, where applicable, the type of wheel unit
- the axle type can also be found on the axle plate.
- On the center cap of the wheel hub you will find the embossed text logo of the axle manufacturer (KNOTT or AL-KO). These jaws are used on axles AL-KO on trailers VAPP types PVV 3.5 including variants with reduced total weight.
ATTENTION!!! These brake shoes cannot be used in axles or wheel units KNOTT.
| Category: | Brzdová obložení pro přívěsy |
|---|---|
| Weight: | 1.01 kg |
| balení: | velká sada |
Be the first who will post an article to this item!
